Tiếng Việt
English
CENTRIFUGAL PUMP DEMONSTRATION UNIT FM50
The centrifugal pump is the machine most commonly used to move liquids from one place to another. As such it is a particularly instructive unit with which to introduce students to the whole subject of rotodynamic fluid machines.
Discovering the relationship between head, flow, rotational speed and power provides a framework of general applicability. For example, matching the required duty point to the conditions of maximum energy efficiency may be explored as a creative student project.
CENTRIFUGAL PUMP DEMONSTRATION UNIT FM50
- A small-scale centrifugal pump demonstration unit, comprising of a water reservoir, the pump, control valves and interconnecting pipework all mounted on a stainless steel base.
- Equipped with electronic measurement sensors for pump head pressure, suction, flow-rate and water temperature.
- Transparent pump volute for visibility
- Capable of being linked to a PC (not supplied) via the IFD7 interface console (available as an essential accessory).
- Supplied with software providing full instructions for setting up, operating, calibrating and performing the teaching exercises
INSTRUCTIONAL CAPABILITIES
- Demonstration of a single-stage centrifugal water pump in operation.
- Measurement of constant-speed pump performance, including production of characteristic curves:
- pump total head
- motor shaft power
- impeller speed
- pump efficiency
- Introduction to pump speed laws.
- Investigation of impeller styles.
- Comparison of student calculations with computer results.
PERFORMANCE SPECIFICATION
- Max flow rate: 1.6L/sec typical
- Max head: 9.0m
- Max pump speed: 1800rpm
- Motor power rating: 250W
CENTRIFUGAL PUMP DEMONSTRATION UNIT FM50
32/7 Ly Thuong Kiet St. – Ward 08 – Tan Binh Dist. – Ho Chi Minh City
Hotline: (+84) 982 74 74 36 - 0909 282 287
1/30 Nguyen Van Vinh St. - Ward 4 - Tan Binh Dist. - Ho Chi Minh City
Tel: (84-28) 3948 22 77 - 3948 22 99 | Fax: (84-28) 38 11 72 72
Email: sales@nqaco.com